Lockout Procedure

Lockout Procedure / Presses and metalworking

CNC lathe lockout procedure

A cNC lathe holds electrical, hydraulic and mechanical energy. Here is where it hurts people, and the procedure for yours: the placard for the machine and the written procedure for the binder.

E1H1M13 energy sources on a typical cNC lathe

Where a cNC lathe hurts people

  • The hydraulic chuck clamps with hundreds of psi. Relieve it before you change jaws.
  • Servo and spindle drives hold a charge after the disconnect opens.

Write the procedure for your cNC lathe

List every source of energy that can move, power or hurt. The placard builds as you go, and the checks run on every change.

Who works on it

Energy sources

    Add a source

    Other metalworking machines

    Every machine · What makes a procedure machine-specific

    A lockout station board with rows of red safety padlocks, danger tags and breaker lockouts

    For the cNC lathe's lockout station

    The devices the placards call for. One lock per person, a tag on every lock.

    • SAFBY safety padlocks, keyed differently, 10 packOne lock per person, numbered, each opened only by its own key.
      Check the current price
    • TRADESAFE "Danger: Do not operate" tags, 30 packVinyl tags with ties, a line for the name, one on every lock.
      Check the current price
    • Master Lock 421 group lockout haspSix locks on one isolation point, for a crew working on the same machine.
      Check the current price
    • Master Lock 1457E410KA lockout tagout kitA personal kit for one authorized employee: padlocks, hasps, tags and electrical lockouts in a pouch.
      Check the current price

    As an Amazon Associate we earn from qualifying purchases.